LIQUID PUMPS





DESIGNED FOR MULTIPLE APPLICATIONS & INDUSTRIES

At Charles Austen we have developed a unique range of liquid pumps range with a large spectrum of flow rates to best fit the environments they are installed in. Our liquid pump range can be used on anything from beverage dispense, IVD analysis, medical suction, ink jet printing and even laser cooling. If cant find the correct pump for the job then visit our bespoke division where our pumps can be modified or custom built from scratch.

ROTARY DIAPHRAGM PUMPS


Patented rotary diaphragm pumps use the Charles Austen patented technology. The flow of liquid is initiated by an eccentrically mounted bearing on a drive shaft revolved within a flexible diaphragm. As the shaft rotates, the bearing flexes the diaphragm, squeezing liquid through the pump. These pumps have outstanding self-priming characteristics and are of a valve-less, seal-less design.

RD01

RD01.jpg
• Max Flow : 0.14 l/min• Max Lift : 5.0m• Max Head : 8.0m• Size : 87 x 54 x 66mm• Connector Size : 8mm OD
Diaphragm : SARLINKHead : POLYPROPYLENE• 110V • 50/60Hz• 230V
Asset-2-compressor (11).jpg
RD-SERIES-DATASHEETdownload

RD1 DOSING

RD1 DOSING.jpg
• Max Flow : 0.85 l/min• Max Vacuum : 300 mbar• Max Pressure : 2.0 bar• Size : 45 x 125 x 61mm• Connector Size : 8mm OD
Diaphragm : SANTROPENEHead : POLYPROPYLENE• 12V • BLDC• 24V
RD1 Dosing Graph.jpg
RD-SERIES-DATASHEETdownload

RD1

RD1.jpg
• Max Flow : 0.85 l/min• Max Vacuum : 300 mbar• Max Pressure : 2.0 bar• Size : 45 x 125 x 61mm• Connector Size : 8mm OD
Diaphragm : SANTROPENEHead : POLYPROPYLENE• 12V • BLDC• 24V
RD1 Graph.jpg
RD-SERIES-DATASHEETdownload

RD2

RD2-3-5.jpg
• Max Flow : 1.7 l/min• Max Vacuum : 200 mbar• Max Pressure : 2.0 bar• Size : 97 x 77 x 59mm• Connector Size : 15/8mm OD
Diaphragm : SANTROPENEHead : POLYPROPYLENE• 12V • BLDC• 24V
RD2 Graph.jpg
RD-SERIES-DATASHEETdownload

RD3

RD2.png
• Max Flow : 3.0 l/min• Max Vacuum : 200 mbar• Max Pressure : 2.0 bar• Size : 97 x 77 x 59mm• Connector Size : 15/8mm OD
Diaphragm : SANTROPENEHead : POLYPROPYLENE• 12V • BLDC• 24V
RD3 Graph.jpg
RD-SERIES-DATASHEETdownload

RD5

RD2.png
• Max Flow : 5.0 l/min• Max Vacuum : 200 mbar• Max Pressure : 2.0 bar• Size : 97 x 77 x 59mm• Connector Size : 15/8mm OD
Diaphragm : SANTROPENEHead : POLYPROPYLENE• 12V • BLDC• 24V
RD5 Graph.jpg
RD-SERIES-DATASHEETdownload

DIAPHRAGM PUMPS


The simple yet efficient diaphragm pumping principle uses a magnetically operated diaphragm. This action flexes a diaphragm at one or both ends of the connecting rod within a totally sealed pumping chamber. This eliminates sliding parts keeping wear, tear and power consumption to a minimum.

DL04

D3 DC.jpg
• Max Flow : 0.4 l/min• Max Lift : 2m• Max Head : 20m• Size : 73 x 30 x 52mm• Connector Size : 4mm
Diaphragm : EPDMHead : NYLON• POLYPROPYLENE• PTFE• 12V •BLDC• 24V
DL04.jpg
DL04-SERIES-DATASHEETdownload

DL2

D5-6.jpg
• Max Flow : 1.6 l/min• Max Lift : 5m• Max Head : 20m• Size : 100 x 42 x 100mm• Connector Size : 4mm
Diaphragm : EPDMHead : NYLON• POLYPROPYLENE• PTFE• 110V •12V• 230V • 24V
DL2.jpg
DL2-SERIES-DATASHEETdownload

CENTRIFUGAL PUMPS


Centrifugal pumps incorporate a rotary impeller which draws the liquid into the inlet. The centrifugal action forces the fluid to the extremities of the chamber and through the outlet at pressure. Due to their valveless design the output from these pumps is completely smooth and gives good flow performance from a compact unit.

C50

C50.jpg
• Max Flow : 50.0 l/min• Max Lift : 8m• Max Head : 0.8m• Size : 167 x 100 x 114mm• Connector Size:Inlet: 25mm ODOutlet: 19mm OD
Impeller : NORYLHead : NITRILE• POLYPROPYLENE• PTFE• 24V
C50.jpg
C50_C50-datasheetdownload

C50 +

C50.jpg
• Max Flow : 55.0 l/min• Max Lift : 10m• Max Head : 1.0m• Size : 167 x 100 x 114mm• Connector Size:Inlet: 25mm ODOutlet: 19mm OD
• 24V​• POLYPROPYLENE• PTFEImpeller : NORYLHead : NITRILE
Asset 3.jpg
C50_C50-datasheetdownload